
All those miscellaneous items that will come in hardy when you need them.
All those miscellaneous items that will come in hardy when you need them.
10mm inner diameter clear vinyl hose for transferring and syphoning.
$4.25
6mm inner diameter clear vinyl hose for transferring and syphoning.
$2.75
$6.50
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
12mm inner diameter clear vinyl hose for transferring and syphoning.
$5.25
8mm inner diameter clear vinyl hose for transferring and syphoning. Sometimes referred to as "7.9mm" inner diameter.
$3.25
$125.00
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
To fit the range of MK Regulators.Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.
$0.75
The thread on this fitting will suit: Standard Keg Couplers with 5/8 threadStandard tap shanks with 5/8 threadMany other home brew fittings with 5/8 Thread
$4.00
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
Brass construction. Fits most standard 1/2 inch garden hose quick couplings.1/2 inch BSP thread. Will also couple with 1/2 inch NPT. Includes rubber washer so no teflon tape needed.
$2.95
1/4 inch BSP Stainless lock nut.
$3.00
This ball valve is sold as a complete assembly so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening.
$25.00
$5.00
Thread 2 Internal Tee bsp
$5.00
Stainless Angle / Elbow Male to Female 1/2 inch BSP
$6.00
27mm Long
$5.00
Stainless hose barb 13mm x 1/2 inch BSP Male.
$6.00
Stainless Steel Barb 13mm x 1/2 BSP Female.
$5.00
BSP 1 Steel washer
$2.00
BSP 1 Washer for
$2.00
These stainless fittings are machined from 304 stainless steel - 6mm x 8mm
$3.00
$3.00
This is a Silicone 5/8 Washer which is suitable for Keg Couplers and Tap Shanks
$0.40
$4.40
$4.95
nut recessed 2 for O lock
$1.65
These stainless fittings are machined from 304 stainless steel - 8mm x 10mm
$3.00
Shank Male x3 Lok tap
$21.95
A plastic part to go on the bottom of the wire bail lid. Always good to have a couple spares of these. The lid doesnt seal well without them
$1.49
$3.00
Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank
$4.00
3/4 Inch BSP Stainless Lock Nut
$3.00
$1.95
$3.00
Butterfly hose clamps are designed for all your plumbing needs. No tools are required, this clamp can be tightened or opened manually.
$1.00
$12.00
$12.00
Head Steel pump
$33.95
Perfect for any brewery build or wide range of fermenter parts that suit the 1.5inch tri-clover standard.
$15.00
Thread 2 with Tri 5 female
$12.00
Reducer inch to 5 tc
$20.00
Assembly Ball Inch valve
$30.00
2 inch Tri Clover end plate with 32mm hole
$5.00
Silicon seal to fit between stainless tri clover fittings.
$3.50
1.5 inch tri clover accessories in 304 stainless steel.
$12.50