Products
-
My Store 0.2 Micron Air Filter
These 0.2 Micron Air Filters will filter out microbes and bacteria. They can be used in many different ways. They can be used with our wort aerator pumps so you can aerate your wort, or can be used as an airlock in the top of your fermenter. They can also be used to filter air going back into a cask when dispensing real ale.This filter is not suitable for liquids and should be discarded if it gets wet.
$5.00
-
My Store 0.5 Micron Stainless Steel Diffusion Stone
The 0.5 micron diffusion stone can be attached to the end of your "gas in" on your keg with 50cm of tubing to rapidly speed up carbonation. Ideal for pure oxygenation as well.
$15.00
-
Kegland 1 Inch Stainless Ball Valve Assembly
Assembly Ball Inch valve
$30.00
-
mykegsonlegs 1.1kg CO2 Cylinder (MKOL)
MyKegOnLegs gas cylinders are high quality aluminum and are lighter to move and cheaper to refill than other cylinders. When you purchase the cylinder it's full and refills work as a "swap and go" in our store.
$185.00
-
mykegsonlegs 1.1kg CO2 Cylinder Refill (MKOL)
Gas refills can only be purchased in store. We swap your empty cylinder for a full one of the same brand and model. Feel free to call ahead to make sure a full replacement cylinder is in stock. Refills are on a first come first served basis and we are not able to hold cylinders aside from our refill stock, including for online orders. We are not able to deliver refills, but you are welcome to arrange a two way courier to deliver your empty bottle and collect a full one - please call to avoid disappointment and to ensure we have stock.
$16.50
-
My Store 1.5 inch to 2 inch TC Reducer
Reducer inch to 5 tc
$20.00
-
My Store 1.5 Inch Tri Clover Flat Plate
1.5 inch tri clover accessories in 304 stainless steel.
$6.00
-
Kegland 1.5 Inch Tri Clover Silcone Beaded Seal
Silicon Beaded Seal for Sanitary Tri-Clover Clamps.
$1.00
-
My Store 1.5 Inch Tri Clover with 1/2 BSP Male
1.5 inch tri clover accessories in 304 stainless steel
$16.00
-
My Store 1.5 Inch Tri Clover with 1/2 Female Thread
Thread 2 with Tri 5 female
$12.00
-
My Store 1.5 inch Tri Clover with 13mm Barb
1.5 inch tri clover accessories in 304 stainless steel.
$12.50
-
My Store 1.5 Inch Tri Clover with 3/4 Female Thread
1.5 inch tri clover accessories in 304 stainless steel
$9.50
-
The Hop + Grain 1.5 inch Tri-clover clamp
1.5 inch tri clover accessories in 304 stainless steel
$9.00
-
Kegland 1.5 Inch Tri-Clover Elbow 90 Degree
Perfect for any brewery build or wide range of fermenter parts that suit the 1.5inch tri-clover standard.
$15.00
-
My Store 1/2 Inch BSP Stainless Equal Tee
Stainless Equal Tee with Internal 1/2 BSP Thread
$8.00
-
Kegland 1/2 Inch BSP Stainless Hex plug
1/2 Inch Stainless Hex Plug
$4.00
-
My Store 1/2" BSP - 13mm Barb Fitting - Female thread
Stainless Steel Barb 13mm x 1/2 BSP Female.
$5.00
-
My Store 1/2" BSP - 13mm Barb fitting - Male thread
Stainless hose barb 13mm x 1/2 inch BSP Male.
$6.00
-
My Store 1/2" BSP Male Compression Fitting for Immersion Chiller
This compression fitting is perfect for attaching to your immersion chiller. This gives you a 1/2" BSP male thread fitting with which to attach camlocks, quick disconnects or just hose barbs to your immersion chiller.
$5.00
-
My Store 1/2" BSP Stainless Ball Valve Assembly
This ball valve is sold as a complete assembly so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening.
$25.00
-
My Store 1/2" BSP Stainless Lock Nut
1/2 Inch BSP stainless lock nut with recess for silicone o-ring.
$3.75
-
Kegland 1/4 BSP Internal Threaded Pipe Socket
1/4" socket with internal thread.
$3.50
-
My Store 1/4 BSP Stainless Lock Nut
1/4 inch BSP Stainless lock nut.
$3.00
-
$4.00
-
My Store 1/4 inch MFL (for 5/8 Hex Nut) Stainless
Handy part to make it easy to connect and disconnect your beer and gas lines to your keg coupler or tap shanks.
$6.00
-
My Store 1/4 Inch NPT x MFL Thread Ball Valve with Check Valve
These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another
$7.00
-
$7.00
-
My Store 1/4" MFL X 1/4" Stainless Nipple
This product is compatible with the regulators that we sell and on the 1/4 MFL side you can fit on the Duotight push in fitting or alternatively you can use the swivel nut and barb.
$4.00
-
$4.00
-
My Store 10mm Vinyl Hose per Meter
10mm inner diameter clear vinyl hose for transferring and syphoning.
$4.25
-
My Store 12inch/30cm Stainless Hop Bazooka Screen
These 304 Grade Stainless Steel 16 Mesh filter screens are ideal as a filter in your mash tun or brewing kettle. The 30cm length is long enough to fit in your keg, keggle or pot. Comes with a 1/2" BSP thread.
$10.00
-
My Store 12mm Vinyl Hose per Meter
12mm inner diameter clear vinyl hose for transferring and syphoning.
$5.25
-
My Store 1500 Watt Heating Element
Weldless heater element for electric brewing systems. Requires a 20mm hole in the brewing vessel. Easy to set up, seals perfectly. These heating elements are powerful and perfect to make use on your boiler. The element is made from 304 grade stainless steel. This element is a weld free design meaning that you can easily install it by simply drilling a hole in your pot/keg/boiler of approximately 20mm and tightening a nut from the outside of the pot. The diameter of the element at the widest point is 20mm so it is ideal if you need to pass the element through the neck of a keg to make a keg boiler. This element also works extremely well with our RIMS Heat Stick Heat Exchanger Housing if you are planning on making a RIMS recirculating system. Features: Powerful 1500 Watt Thread:20mm, flange:40mm, length element only:290mm, diameter: 20mm Food grade high termperature silicone seal
$50.00
-
My Store 15L Fermenter
HDPE Plastic "Ampi" Style fermenter. Comes with airlock, tap, grommet and sediment reducer.
$27.50
-
My Store 16g CO2 Cartridge
Suits various mini regulators, as well as whipped cream dispensers for carbonating water etc. Typically you will use about 6g per litre of CO2 for carbonating and or 6g per litre to dispense.
$2.00
-
My Store 19L Ball Lock Premium Keg
Brand new stainless steel premium cornelius style keg. Ball lock posts, black rubber handle and foot prevents damage to your fridge or floor. These premium brand new kegs are rated to 130psi working pressure and are made using a robotic orbital welding machine. The finish on these kegs are far superior to our other economy stainless steel kegs and are made with super smooth welds making them sanitary and easier to clean. The black rubber on these kegs also make them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator. The two sizes available are the 9.5L (2.5gallon) with a stainless handle or the 19L (5 gallon) size with rubber handles.
$135.00
-
My Store 2 inch Tri Clover Bulkhead
This 304 stainless steel tri-clover bulkhead includes seals and will attache to any standard tank. Just drill a hole and tighten this item to your vessel wall and in moments you will have a tank with tri-clover fittings on it.
$40.00
-
My Store 2 inch Tri Clover Flat Plate with Hole
2 inch Tri Clover end plate with 32mm hole
$5.00
-
Kegland 2 Inch Tri Clover Flat Seal
Silicon seal to fit between stainless tri clover fittings.
$3.50
-
Kegland 2 Inch Tri Clover Silcone Beaded Seal
Silicon seal for use with 2inch Tri-Clover Clamps.
$1.50
-
My Store 2 Inch Tri Clover to 3/4 Female
Perfect for any brewery build or wide range of fermenter parts that suit the 2inch tri-clover standard.
$17.00
-
My Store 2 inch Tri Clover to 3/8 Female
$17.00
-
The Hop + Grain 2 inch Tri-clover clamp
$10.00
-
$15.00
-
My Store 2 Way Gas Line Manifold
This 2 way manifold allows you to split CO2 from one regulator to two kegs, with built-in check valves for safe and efficient home kegging.
$22.00
-
mykegsonlegs 2.3kg CO2 Cylinder Refill (MKOL)
Gas refills can only be purchased in store. We swap your empty cylinder for a full one of the same brand and model. Feel free to call ahead to make sure a full replacement cylinder is in stock. Refills are on a first come first served basis and we are not able to hold cylinders aside from our refill stock, including for online orders. We are not able to deliver refills but you are welcome to arrange a two way courier to deliver your empty bottle and collect a full one - please call to avoid disappointment and to ensure we have stock.
$36.00
-
My Store 2.6kg CO2 Cylinder Refill (KK)
Gas refills can only be purchased in store. We swap your empty cylinder for a full one of the same brand and model. Feel free to call ahead to make sure a full replacement cylinder is in stock. Refills are on a first come first served basis and we are not able to hold cylinders aside from our refill stock, including for online orders. We are not able to deliver refills but you are welcome to arrange a two way courier to deliver your empty bottle and collect a full one - please call to avoid disappointment and to ensure we have stock.
$39.00
-
My Store 23L HDPE Jerry Can
HDPE Food Grade Plastic Jerry Can, holds approximately 23L. Perfect to use as a "clearing cube" for crash chilling prior to bottling, or as a fermenter that fits perfectly inside a small fridge.
$27.50
