All those miscellaneous items that will come in hardy when you need them.
Plumbing
-
My Store 1.5 Inch Tri Clover with 1/2 Female Thread
Thread 2 with Tri 5 female
$12.00
-
Kegland 1.5 Inch Tri Clover with 1/2 BSP Male
1.5 inch tri clover accessories in 304 stainless steel
$16.00
-
My Store Stainless Keg Dip Tube - Long/Liquid
Long/Liquid Stainless Keg Dip Tube suitable for 19L Cornelius style kegs. Can be cut down to suit 9.5L Liquid Tube. Comes with a dip tube o-ring
$12.00
-
The Hop + Grain 1/2 Inch BSP Stainless Equal Tee
Stainless Equal Tee with Internal 1/2 BSP Thread
$8.00
-
My Store Duotight - 8mm Push In Elbow
This elbow piece is suitable for beer/gas line in 4mm and 5mm or most lines with 8mm outer diameter.
$4.50
-
$7.00
-
Keg King 8mm Push in Fittings x 1/4 Inch Male
$3.50
-
Kegland Seal Kit for Intertap FC
$7.00
-
My Store Tri Clover 2 inch End Cap
$5.00
-
Kegland 1.5 Inch Tri Clover Flat Plate
1.5 inch tri clover accessories in 304 stainless steel.
$6.00
-
My Store Thick 5/8 Silicone Washer
$2.00
-
The Hop + Grain Stainless Tee 6mm (1/4")
The stainless tee peice is made to fit 4mm - 6mm beer line
$4.00
-
Kegland 5/8 Vinyl Washers
$0.25
-
Kegland Type B Camlock Female x 1/2 Male
$3.00
-
Kegland Blowtie Spunding Valve/Adjust PRV (0-40psi) (KL03643)
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
$15.00
-
The Hop + Grain 1.5 inch Tri-clover clamp
1.5 inch tri clover accessories in 304 stainless steel
$9.00
-
$8.00
-
Kegland Duotight 9.5mm x 5/8 inch Female
$7.50
-
$15.00
-
Kegland Liquid Ball Lock Post 1/4 Bulkhead assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately. This would enable you to make a keg out of any pressure vessel if you wanted to.
$16.00
-
$4.00
-
$145.00
-
$4.00
-
My Store 1/4 BSP Stainless Lock Nut
1/4 inch BSP Stainless lock nut.
$3.00
-
$5.00
-
My Store Stainless Tee w Internal 1/2" BSP Thread
Thread 2 Internal Tee bsp
$5.00
-
My Store Stainless Pipe with External 1/2" BSP Thread
27mm Long
$5.00
-
My Store Silicon O ring for 1/2 BSP recessed lock nut
nut recessed 2 for O lock
$1.65
-
Kegland K-Lok Female x3/4 Male (Tap Shank)
Shank Male x3 Lok tap
$21.95
-
My Store Keg Lid Foot
A plastic part to go on the bottom of the wire bail lid. Always good to have a couple spares of these. The lid doesnt seal well without them
$1.49
-
My Store 6mm Straight Barbtail for 5/8 Hex Nut
Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank.
$4.00
-
My Store 3/4 BSP Stainless Lock Nut
3/4 Inch BSP Stainless Lock Nut
$3.00
-
Kegland Stainless Steel Pump Head
Head Steel pump
$33.95
-
My Store 1.5 inch to 2 inch TC Reducer
Reducer inch to 5 tc
$20.00
-
Kegland 1 Inch Stainless Ball Valve Assembly
Assembly Ball Inch valve
$30.00
-
Kegland 2 inch Tri Clover Flat Plate with Hole
2 inch Tri Clover end plate with 32mm hole
$5.00
-
Kegland 2 Inch Tri Clover Flat Seal
Silicon seal to fit between stainless tri clover fittings.
$4.50
-
My Store 1.5 inch Tri Clover with 13mm Barb
1.5 inch tri clover accessories in 304 stainless steel.
$12.50
-
Kegland 1/4 Inch NPT x MFL Thread Ball Valve with Check Valve
These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another
$7.00
-
The Hop + Grain Stainless Cross X 3/8"
Stainless Cross Piece 3/8 Inch Barbed\n \n
$7.50
-
The Hop + Grain Stainless Cross X 1/4"
Stainless Cross Piece 1/4 Inch Barbed
$5.00
-
Kegland 1.5 Inch Tri Clover with 3/4 Female Thread
1.5 inch tri clover accessories in 304 stainless steel
$9.50
-
My Store 3 Way Ball Valve to 1/2" Threads
This is a 304 Grade Stainless Steel 3 Way Ball Valve all 1/2" BSP Female
$32.50
-
The Hop + Grain Stainless Air Line Tee 3/8"
It will fit most PET soft drink bottles and many types of glass bottles
$6.00
-
The Hop + Grain Tri-clamp Stainless Tee 1.5"
$34.95
-
$4.00
-
My Store 2 inch Tri Clover Bulkhead
This 304 stainless steel tri-clover bulkhead includes seals and will attache to any standard tank. Just drill a hole and tighten this item to your vessel wall and in moments you will have a tank with tri-clover fittings on it.
$40.00
-
My Store 3/8" Silicone Hose per Metre
Food grade, heat safe hose, fits over fermenter taps to transfer from fermenter to secondary/keg and. Can be used to transfer hot wort in multi vessel and RIMS systems.
$7.50
