All those miscellaneous items that will come in hardy when you need them.
Plumbing
-
The Hop + Grain 1.5 inch Tri-clover clamp
1.5 inch tri clover accessories in 304 stainless steel
$9.00
-
My Store 1/4" MFL X 1/4" Stainless Nipple
This product is compatible with the regulators that we sell and on the 1/4 MFL side you can fit on the Duotight push in fitting or alternatively you can use the swivel nut and barb.
$4.00
-
$15.00
-
Kegland Duotight 9.5mm x 5/8 inch Female
$7.50
-
My Store Duotight - 9.5mm (3/8) Check Valve
$7.50
-
The Hop + Grain Stainless 140mm Weldless Thermowell
$35.00
-
My Store Stainless 100mm Weldless Thermowell
$30.00
-
My Store 8mm Push in Fittings x 1/2 Inch BSP
$4.00
-
Kegland 1/2 Inch BSP Stainless Hex plug
1/2 Inch Stainless Hex Plug
$4.00
-
$15.00
-
Kegland 8mm Straight Barbtail for 5/8 Hex Nut
Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank
$3.50
-
$4.95
-
Kegland Stainless Stepless Clamp - 16-18mm line
1 x Single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
Kegland Tube cutter
Cuts tube in seconds!
$4.00
-
Kegland Liquid Ball Lock Post 1/4 Bulkhead assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately. This would enable you to make a keg out of any pressure vessel if you wanted to.
$16.00
-
Kegland 2 inch Tri Clover to 1/2 Female
$17.00
-
Kegland 2 Inch Tri Clover to 3/4 Female
Perfect for any brewery build or wide range of fermenter parts that suit the 2inch tri-clover standard.
$17.00
-
$3.00
-
$15.00
-
$3.50
-
Kegland Duotight 9.5mm Tee Piece
$8.00
-
My Store Gas Ball Lock Post 1/4 Bulkhead assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer Dip Tubes can be purchase separately. This would enable you to make a keg out of any pressure vessel if you wanted to.
$16.00
-
Kegland Stainless Elbow 1/4 BSP Male x 1/2 BSP Female
Stainless Angle / Elbow Male to Female 1/4 inch BSP
$4.00
-
Kegland In line regulator
$7.00
-
$4.00
-
$145.00
-
Kegland 1/4 inch MFL (for 5/8 Hex Nut) Stainless
Handy part to make it easy to connect and disconnect your beer and gas lines to your keg coupler or tap shanks.
$6.00
-
$4.00
