All those miscellaneous items that will come in hardy when you need them.
Plumbing
-
Kegland Duotight 8mm x 5/8 inch Female
The thread on this fitting will suit: Standard Keg Couplers with 5/8 threadStandard tap shanks with 5/8 threadMany other home brew fittings with 5/8 Thread
$4.00
-
Kegland Stainless Stepless Clamp - 7 - 10mm line
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
My Store 6mm Vinyl Hose per Meter
6mm inner diameter clear vinyl hose for transferring and syphoning.
$2.75
-
Kegland Nylon Regulator Washer
To fit the range of MK Regulators.Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.
$0.75
-
My Store 10mm Vinyl Hose per Meter
10mm inner diameter clear vinyl hose for transferring and syphoning.
$4.25
-
My Store 8mm Vinyl Hose per Meter
8mm inner diameter clear vinyl hose for transferring and syphoning. Sometimes referred to as "7.9mm" inner diameter.
$3.25
-
$6.50
-
Kegland Stainless Stepless Clamp - 14 - 16mm line
1 x Single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
My Store 12mm Vinyl Hose per Meter
12mm inner diameter clear vinyl hose for transferring and syphoning.
$5.25
-
My Store Silicone Washer for 1/2" BSP
BSP 1 Washer for
$2.00
-
$4.95
-
Kegland Duotight 8mm x 9.5mm Reducer
This reducer is suitable for beer and gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD hosing reducing this down to 8mm OD beer and gas line, suitable for 4mm ID and 5mm ID x *mm OD line
$4.50
-
My Store Garden Hose Quick Connect 1/2" Female
Brass construction. Fits most standard 1/2 inch garden hose quick couplings.1/2 inch BSP thread. Will also couple with 1/2 inch NPT. Includes rubber washer so no teflon tape needed.
$2.95
-
$125.00
-
My Store Stainless Elbow 1/2 BSP Male X 1/2 BSP Female
Stainless Angle / Elbow Male to Female 1/2 inch BSP
$6.00
-
My Store Stainless Barb Splicer - 6mm x 8mm
These stainless fittings are machined from 304 stainless steel - 6mm x 8mm
$3.00
-
My Store Intertap Self Closing Tap Spring
$1.95
-
Kegland 2 Inch Tri Clover Silcone Beaded Seal
Silicon seal for use with 2inch Tri-Clover Clamps.
$1.50
-
$7.00
-
Kegland Stainless Stepless Clamp - 12-14mm line
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
$8.00
-
Kegland Stainless Stepless Clamp - 10.5-12.5mm
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
Kegland Camlock Replacement Seal
$2.00
-
$5.00
-
My Store Stainless Tee w Internal 1/2" BSP Thread
Thread 2 Internal Tee bsp
$5.00
-
My Store 1/2" BSP - 13mm Barb fitting - Male thread
Stainless hose barb 13mm x 1/2 inch BSP Male.
$6.00
-
My Store Stainless Steel Washer 1/2" BSP
BSP 1 Steel washer
$2.00
-
My Store Stainless Joiner - 8mm x 8mm
$3.00
-
My Store 5/8 Silicone Washer Seal for Keg Coupler and Tap Shank
This is a Silicone 5/8 Washer which is suitable for Keg Couplers and Tap Shanks
$0.40
-
$4.40
-
My Store Silicon O ring for 1/2 BSP recessed lock nut
nut recessed 2 for O lock
$1.65
-
My Store Stainless Barb Splicer - 8mm x 10mm
These stainless fittings are machined from 304 stainless steel - 8mm x 10mm
$3.00
-
My Store Keg Lid Foot
A plastic part to go on the bottom of the wire bail lid. Always good to have a couple spares of these. The lid doesnt seal well without them
$1.49
-
My Store 6mm Straight Barbtail for 5/8 Hex Nut
Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank.
$4.00
-
My Store Stainless Joiner 13mm x 13mm
$3.00
-
My Store Butterfly Hose Clamp
Butterfly hose clamps are designed for all your plumbing needs. No tools are required, this clamp can be tightened or opened manually.
$1.00
-
$12.00
-
Kegland 1.5 Inch Tri-Clover Elbow 90 Degree
Perfect for any brewery build or wide range of fermenter parts that suit the 1.5inch tri-clover standard.
$15.00
-
My Store 1.5 Inch Tri Clover with 1/2 Female Thread
Thread 2 with Tri 5 female
$12.00
-
Kegland 1 Inch Stainless Ball Valve Assembly
Assembly Ball Inch valve
$30.00
-
Kegland 2 Inch Tri Clover Flat Seal
Silicon seal to fit between stainless tri clover fittings.
$3.50
-
Kegland 1/4 Inch NPT x MFL Thread Ball Valve with Check Valve
These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another
$7.00
-
The Hop + Grain Stainless Cross X 3/8"
Stainless Cross Piece 3/8 Inch Barbed\n \n
$7.50
-
The Hop + Grain Stainless Cross X 1/4"
Stainless Cross Piece 1/4 Inch Barbed
$5.00
-
Kegland 1.5 Inch Tri Clover with 1/2 BSP Male
1.5 inch tri clover accessories in 304 stainless steel
$16.00
-
My Store Stainless Keg Dip Tube - Long/Liquid
Long/Liquid Stainless Keg Dip Tube suitable for 19L Cornelius style kegs. Can be cut down to suit 9.5L Liquid Tube. Comes with a dip tube o-ring
$12.00
-
My Store 3 Way Ball Valve to 1/2" Threads
This is a 304 Grade Stainless Steel 3 Way Ball Valve all 1/2" BSP Female
$32.50
-
The Hop + Grain 2 inch Tri-clover clamp
$10.00
