All those miscellaneous items that will come in hardy when you need them.
Plumbing
-
The Hop + Grain Tri-clamp Stainless Tee 1.5"
$34.95
-
$4.00
-
My Store Duotight - 8mm Push In Elbow
This elbow piece is suitable for beer/gas line in 4mm and 5mm or most lines with 8mm outer diameter.
$4.50
-
Keg King 8mm Push in Fittings x 1/4 Inch Male
$3.50
-
Kegland Seal Kit for Intertap FC
$7.00
-
My Store Tri Clover 2 inch End Cap
$5.00
-
Keg King Hose Barb - 13mm x 1/2 BSB Male
Stainless Hose Barb 1/2 inch BSP Male x 13mm
$5.00
-
$8.00
-
Kegland 1.5 Inch Tri Clover Silcone Beaded Seal
Silicon Beaded Seal for Sanitary Tri-Clover Clamps.
$1.00
-
Kegland 1.5 Inch Tri Clover Flat Plate
1.5 inch tri clover accessories in 304 stainless steel.
$6.00
-
My Store Thick 5/8 Silicone Washer
$2.00
-
The Hop + Grain Stainless Tee 6mm (1/4")
The stainless tee peice is made to fit 4mm - 6mm beer line
$4.00
-
My Store Pressure Relief Valve (PRV) - 65PSI
These pressure relief valves are made to the cornelius standard and are compatible with cornelius type kegs.
$4.50
-
Kegland 5/8 Vinyl Washers
$0.25
-
My Store Type S Female Camlock 1/2" barb
$12.00
-
The Hop + Grain Type C Male Camlock 1/2" MBSP
$10.00
-
Kegland Type B Camlock Female x 1/2 Male
$9.95
-
Kegland Blowtie Spunding Valve/Adjust PRV (0-40psi) (KL03643)
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
$15.00
-
My Store 1/4" MFL X 1/4" Stainless Nipple
This product is compatible with the regulators that we sell and on the 1/4 MFL side you can fit on the Duotight push in fitting or alternatively you can use the swivel nut and barb.
$4.00
-
$15.00
-
$15.00
-
Kegland Duotight 9.5mm x 5/8 inch Female
$7.50
-
My Store Duotight - 9.5mm (3/8) Check Valve
$7.50
-
The Hop + Grain Stainless 140mm Weldless Thermowell
$35.00
-
My Store 1/2" BSP Stainless Lock Nut
1/2 Inch BSP stainless lock nut with recess for silicone o-ring.
$3.75
-
Kegland 1/2 Inch BSP Stainless Hex plug
1/2 Inch Stainless Hex Plug
$4.00
-
Kegland 8mm Straight Barbtail for 5/8 Hex Nut
Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank
$3.50
-
Kegland Stainless Stepless Clamp - 16-18mm line
1 x Single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
Kegland Liquid Ball Lock Post 1/4 Bulkhead assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately. This would enable you to make a keg out of any pressure vessel if you wanted to.
$16.00
-
Kegland 2 inch Tri Clover to 1/2 Female
$17.00
-
$3.00
-
Kegland Stainless Barb Splicer 6mm x 13mm
These stainless fittings are machined from 304 stainless steel. The stainless splicer is perfect for attaching 4mm-6mm ID line to 10mm-13mm ID line
$3.00
-
Kegland Duotight 9.5mm Tee Piece
$8.00
-
Kegland Stainless Keg Dip Tube - Short/Gas
Short/Gas Stainless Keg Dip Tube suitable for Cornelius style kegs both 9.5L and 19L. Comes with a dip tube o-ring
$3.00
-
My Store Gas Ball Lock Post 1/4 Bulkhead assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer Dip Tubes can be purchase separately. This would enable you to make a keg out of any pressure vessel if you wanted to.
$16.00
-
Kegland 8mm SS Push in for 5/8 inch thread
These great little adaptors screw directly onto your keg setup. They allow you to push your beer/gas line with 8mm OD (5/16”) directly into the fitting. This makes it easy to disconnect the beer/gas line at a later stage and it eliminates the need to use hose clamps. This unit will suit 5/8” BSP threads that are on our keg couplers, tap shanks and many other beer related fittings.
$6.00
-
$4.00
