Everything you need to properly store and manage your fermenting beers. HDPE plastic is food grade and alcohol safe and will provide many years of good service if cared for properly.
Fermentation Equipment
-
My Store Flip Top Stopper for 5L Demijohn
A swing lid closure for Handcraft Supplies 5 Litre Demijohn.
$2.00
-
My Store Carboy 5L (1.3 Gallon)
Holds 5L when filled to the very top, we suggest filling to about 4.5L if using for fermentation to allow for krausen. Item may differ from picture slightly. The handle shape may vary, and the glass may be 'faceted'. Unfortunately we don't have any control over this, but rest assured the volume and quality will be the same. Please note: picture shows flip top lid, which is not included, and cusrrent stock has a screw top lid and requires the 25-37cm bung.
$20.00
-
My Store 15L Fermenter
HDPE Plastic "Ampi" Style fermenter. Comes with airlock, tap, grommet and sediment reducer.
$27.50
-
My Store Wide Mouth Glass Carboy - 5L
These glass carboys look great and provide a very stable oxygen barrier so are great for secondary fermentation, with a wide mouth for easy cleaning. 5L comes with tap for easy transfer to bottles - ideal for Kombucha. Please note these are large, somewhat heavy and fragile.??We strongly recommend you collect these from our store??instead of choosing??delivery. While we do our best to pack them well, it's possible that they could be broken during transit and breakages aren't covered.
$20.00
-
My Store 23L HDPE Jerry Can
HDPE Food Grade Plastic Jerry Can, holds approximately 23L. Perfect to use as a "clearing cube" for crash chilling prior to bottling, or as a fermenter that fits perfectly inside a small fridge.
$27.50
-
My Store Ampi Fermenter O-Ring
Replacement lid O-ring for Ampi type fermenters including all 15L, 25L, 30L and 60L fermenters we sell.
$4.00
-
My Store Ampi Lid Spare
Spare lid for ampi style fermenters. Fits 15L, 30L and 60L fermenters.
$12.50
-
Kegland Heat Belt
Fits around your fermenter to provite gentle heat to your fermentation. Use in the winter to keep ale yeast happy. Can also be used with a thermostat.
$40.00
-
My Store Bored Bung, 47-58mm, Silicon
Perfect for converting an empty keg into a fermenter.
$12.50
-
My Store Bored Bung, 37-45mm, Silicon
Perfect for use with erlenmeyer flasks.
$7.50
-
My Store Bored Bung, 25-38mm, Silicon
Fits in a variety of Carboys and Demijohns including our 5L carboy. Tapers from 25mm diameter up to 38mm, and is bored to accept an airlock.
$5.00
-
My Store 25L Fermenter
HDPE Plastic "Ampi" Style fermenter. Comes with airlock, tap and grommet. True volume is 27.5L to the top, but we call these 25L fermenters as that's their useable space. Please note current fermenter is blue, due to a new supplier
$35.00
-
My Store 30l Fermenter
HDPE Plastic Ampi Style fermenter. Comes with airlock, tap, and grommet.
$40.00
-
My Store Sediment Reducer
Replacement sediment reducer. Fits into the back of fermenter tap and assists in gently drawing off beer, leaving sediment and trub behind.
$1.50
-
My Store Stick-On Thermometer Strip
Sticks to plastic fermenters and glass carboy/demijohns as well as erlenmeyer flasks. Gives an accurate temperature between 10 and 40 degrees celcius.
$3.00
-
My Store Rubber Grommet
Replacement black rubber grommet for all fermenter lids. Forms a tight seal with the airlock.
$1.50
-
My Store Fermenter Tap
Screw in plastic fermenter tap, suitable for all our 15, 25, 30 and 60 litre fermenters.
$4.50
-
My Store Airlock, Senior
A specifically selected 7g Coopers Yeast is supplied with this Brewing Extract.
$5.00
-
My Store Airlock, Bubbler (Vintage)
A vintage style bubbler airlock.
$4.00
-
My Store Glass Carboy - 23L
These glass carboys look great and provide a very stable oxygen barrier so are great for secondary fermentation. Fits 25-38mm bung Please note these are large, somewhat heavy and fragile.??We strongly recommend you collect these from our store instead of choosing??delivery. While we do our best to pack them well, it's possible that they could be broken during transit and breakages aren't covered.
$110.00
-
My Store Glass Carboy - 11L
These glass carboys look great and provide a very stable oxygen barrier so are great for secondary fermentation. Fits 25-38mm bung Please note these are large, somewhat heavy and fragile. We strongly recommend you collect these from our store instead of choosing delivery. While we do our best to pack them well, it's possible that they could be broken during transit and breakages aren't covered.
$80.00
-
My Store Carboy Handle
Fits 11L and 23L glass carboys. Makes glass carboys easier and safer to carry.
$10.00
-
My Store Grainfather Glycol Chiller
Control your fermentation temperature accurately, every time!Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results. Design:With a sleek and compact design, that still accommodates our full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that deliver’s craft brewery like results, on a small footprint. With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 4°C (39°F). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitising - a true innovation for a fermenter on this scale. Features:• Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions.• Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.• Includes bonus Conical Fermenter Coat and propylene glycol to get you efficient cooling for your fermenter right away.What’s Included:• Glycol Chiller• Wall outlet power cord with plug• 2 x cooling connection couplers• 2 x 2 m (6.5 ft) insulated hoses• 1 x glycol funnel• 1 x silicon tube for priming pumpSpecifications:• LED display• 6 L (1.5 US Gal) glycol tank• 300 W• 220 – 240 V, 50Hz• 390W x 450D x 656H (mm)• Weight: 28.3 kg (62 lbs)IMPORTANT PLEASE READ: Make sure the chiller has been standing upright for 24 hours before turning it ON. Before using the Glycol Chiller, you must prime the pump by carefully following the instructions.
$1,730.00
-
Grainfather Grainfather Conical Fermenter Pro Edition
Ferment like never before! The Grainfather Conical Fermenter gives the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised. The Grainfather Conical Fermenter provides you with a modular system for all of this and more! The basic unit provides a professional quality fermentation environment for any beer style and a range of add ons are also available to further enhance the fermenter, depending on your stage of brewing and your budget allows. FEATURES: • Double Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve. • Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12 V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature controlled room. The fermenter acts as an artificial environment which can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. • Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter and never needs cleaning or sanitising - a true innovation for a fermenter of this scale. Easy Access to the Interior for Hassle Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimises the risk of infection. Golden Angle Conical: The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. WHAT’S INCLUDED? • Conical Fermenter • Fermenter Lid • Rubber Bung • Bubbler Airlock • Cone Plug • Cone Plug Seal • 5 cm (2") Tri Clamp • Digital Temperature Display (does not control temperature, Temperature Controller available separately) • Powder Adapter and Wall Plug • 2 m (6.5 ft) M12-3PIN Power Cord • Dual Valve Tap• Digital Temperature ControllerSPECIFICATIONS: • 304 Stainless Steel Body (polished inner and brushed outer) • 30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 Us Gal) • 30W, 12V heating power • 3.8 cm (1.5") ferrule on lid (for pressure transfer attachments) • 5 cm (2") ferrule on bottom of cone • Dimensions of Conical Fermenter: Diameter with handles: 360 mm Height (without airlock): 910 mm Height with bubbler airlock: 1090 mm • Dimensions of Carton 368 mm W x 325 mm L x 905 mm HFerment like never before! The Grainfather Conical Fermenter gives the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised.
$900.00
-
My Store Heating Element Power Cord (IEC)
IEC Power Heating cord
$12.95
-
Morgans Heating Pad
This Mangrove Jack’s Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits. Heat Pad Specs:- Provides low, constant heat where it is needed for fermentation.- Aids yeast activity and helps avoid stuck fermentation.- Inexpensive to run. - Voltage: 220-240V- Power: 25W- Colour: White
$50.00
-
My Store Top Hat Grommet
For fitting handy or bubbler type airlocks to your fermenter with an airtight seal.
$2.50
-
My Store Imake Pail and Lid - 30L
Contains a 30L Fermenter and Lid (undrilled).
$40.00
-
My Store Demijohn Clip Replacement Seal
Replacement seal for 5 litre demijohn clip
$0.50
-
My Store Solid Bung, 47-58mm, Silicon
Perfect for converting an empty keg into a fermenter.
$12.50
-
My Store Solid Bung, 37-45mm, Silicon
Perfect for use with erlenmeyer flasks.
$7.50
-
My Store Solid Bung, 25-38mm, Silicon
Fits in a variety of Carboys and Demijohns including our 5L carboy. Tapers from 25mm diameter up to 38mm
$5.00
-
My Store Grainfather Whirlpool and Aeration Brewing Paddle
Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process. The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort.
$47.50
-
My Store Magnetic Stir Plate
Start your yeast the right way! Works a treat with 1,3,5L flasks. Speed control and sturdy build. Happy yeast happy beer happier brewer!
$75.00
